LIVE US PULSE: Loading NOAA NWS Alerts, DOE ODIN Outages, USGS Quakes & Wildfires...
Live Situation Room →
Emergency Preparedness
U.S. EIA Form 861 Utility Profile • Utility #16088 • Municipal • CISO

City of Riverside - (CA) (CA) Outage & Grid Reliability

City of Riverside - (CA) (U.S. EIA Utility #16088, Municipal) serves 114,117 total customers across 1 county/counties in California (CISO grid). In official 2025 U.S. EIA Form 861 filings, customers experienced an average of 88.3 outage minutes per year (1.5 hours, SAIDI with major events) across 0.49 interruptions/yr — earning an EP Utility Reliability Grade of AAA. Observed average residential rate: 21.94¢/kWh.

EIA Outage Time (SAIDI)88.3 min/yr (1.5 hrs)
Reliability GradeGrade AAA
Customers Served114,117 Total
Avg Residential Rate21.94¢/kWh
Utility Reliability Summary (City of Riverside - (CA)): City of Riverside - (CA) (U.S. EIA Utility #16088, Municipal) serves 114,117 total customers across 1 county/counties in California (CISO grid). In official 2025 U.S. EIA Form 861 filings, customers experienced an average of 88.3 outage minutes per year (1.5 hours, SAIDI with major events) across 0.49 interruptions/yr — earning an EP Utility Reliability Grade of AAA. Observed average residential rate: 21.94¢/kWh.
Utility Reliability Field Brief • City of Riverside - (CA) (CA)

What City of Riverside - (CA) Outage Data Means for Customers

City of Riverside runs a municipal utility inside the CISO balancing authority, serving 114,117 customers: 101,042 residential, 12,377 commercial, and 698 industrial. The 2025 EIA Form 861 numbers are good. SAIDI with major events is 88.3 minutes a year, SAIFI is 0.49 outages a year, and without major events SAIDI drops to 75.8 minutes. That earns an AAA grade, the top decile for reliability at 90 minutes a year or less.

In plain terms, the average customer loses power about once every two years. Dividing minutes by interruptions gives roughly three hours per outage. Major events add only about 12.5 minutes a year to the average, so storms and big disturbances are not what drives your numbers here.

Averages hide the tail, though. Some feeders see more outages than others, and one bad day can run far longer than three hours. Your own street, and whether it is overhead or underground, matters more than the citywide figure. Use the data to decide how much backup you need, not whether you need any.

Sizing Quiet Home Backup vs. Standby Power in CA

With outages this infrequent, I would size backup for a typical three-hour event and a bad day, not a week. A battery system with an inverter handles that quietly, with no fuel to store and no exhaust. Start by listing what you must keep running: refrigeration, internet, lights, phone charging, a medical device, maybe a furnace blower or a single air conditioner. Add up their running watts, then check startup surge on motors and compressors. Surge is where undersized systems trip.

At 21.94 cents per kWh residential, a battery that shifts or stores energy costs you little to cycle. Pairing it with rooftop solar makes sense if you want recharging during a longer outage. A standby generator earns its place if you rely on well pumps, run powered medical equipment for long stretches, or can't tolerate any gap. If you buy one, get a transfer switch installed by a licensed electrician, put the unit well away from windows, and confirm the engine meets current U.S. EPA and California emissions rules. Never backfeed a panel through a dryer outlet.

What Local Shops, Clinics & Facilities on City of Riverside - (CA) Lines Should Do

For the 12,377 commercial and 698 industrial accounts, the question is what a three-hour outage costs you. Walk the building and sort loads into three groups: life-safety and critical, important, and can wait. Put the critical group on a dedicated backup panel so you are not sizing for the whole building.

Food service and retail need refrigeration, point-of-sale, network gear, and egress lighting. Clinics and care facilities need to confirm which circuits feed medical devices, medication refrigeration, and records systems, then match those to backup with a written plan. A short-gap UPS covers computers and networking, and a generator or larger battery covers the rest. Industrial sites should watch for momentary interruptions and voltage sags, because a process that restarts badly can cost more than the outage itself.

Whatever you install, test it. Run the transfer under load on a schedule, log fuel age and battery health, and keep a one-page restart checklist at the panel. Ask the city utility for feeder-level outage history on your service point. Good citywide reliability only helps if your backup works on the day yours fails.

1. Official U.S. EIA Form 861 Reliability & Customer Record

EIA Form 861 MetricObserved Utility ValueReporting Basis
SAIDI (Total Outage Minutes / Year)88.3 min/yr (1.5 hrs)All Events w/ Major Event Days (2025)
SAIFI (Average Outages / Year)0.49 interruptions/yrIEEE / Utility Standard w/ MED
CAIDI (Avg Restoration Minutes / Outage)178.7 min/outageAverage Customer Outage Duration
SAIDI (Blue-Sky / Excluding Major Storms)75.8 min/yrWithout Major Event Days
Total Customers (Res / Com / Ind)114,117 (101,042 / 12,377 / 698)2025 EIA Form 861
Observed Residential Electricity Rate21.94¢/kWh2025 EIA Revenues / MWh
Ownership & Balancing AuthorityMunicipal • CISOU.S. EIA Form 861

2. Counties Served by City of Riverside - (CA) (1 Tracked in California)

Select your county below to view local FEMA disaster history, CMS 24/7 emergency hospitals, NOAA Weather Radio frequencies, and county Continuity Grades:

3. Frequently Asked Questions (City of Riverside - (CA))

How reliable is City of Riverside - (CA) compared to other US utilities?

Under 2025 U.S. EIA Form 861 reporting, City of Riverside - (CA) logged 88.3 total outage minutes/year (SAIDI with Major Event Days) and 75.8 minutes/year excluding major storms (Top-Decile Grid Reliability (<=90 min/yr)).

What counties does City of Riverside - (CA) serve in California?

U.S. EIA Form 861 Service Territory records map City of Riverside - (CA) to Riverside County in California.

What backup battery or generator size is recommended for City of Riverside - (CA) customers?

For outages lasting 4 to 24+ hours, homeowners should start with 7–14 kWh of quiet indoor LFP battery backup for refrigeration, Wi-Fi, and medical devices—or an 18–22 kW standby generator with a UL 1008 transfer switch for full HVAC/well loads.

Free backup power & water sizer (60 sec) Size Backup Power