LIVE US PULSE: Loading NOAA NWS Alerts, DOE ODIN Outages, USGS Quakes & Wildfires...
Live Situation Room →
Emergency Preparedness
U.S. EIA Form 861 Utility Profile • Utility #4922 • Investor Owned • PJM

Dayton Power & Light Co (OH) Outage & Grid Reliability

Dayton Power & Light Co (U.S. EIA Utility #4922, Investor Owned) serves 528,722 total customers across 24 county/counties in Ohio (PJM grid). In official 2025 U.S. EIA Form 861 filings, customers experienced an average of 167.6 outage minutes per year (2.8 hours, SAIDI with major events) across 0.99 interruptions/yr — earning an EP Utility Reliability Grade of A. Observed average residential rate: 9.82¢/kWh.

EIA Outage Time (SAIDI)167.6 min/yr (2.8 hrs)
Reliability GradeGrade A
Customers Served528,722 Total
Avg Residential Rate9.82¢/kWh
Utility Reliability Summary (Dayton Power & Light Co): Dayton Power & Light Co (U.S. EIA Utility #4922, Investor Owned) serves 528,722 total customers across 24 county/counties in Ohio (PJM grid). In official 2025 U.S. EIA Form 861 filings, customers experienced an average of 167.6 outage minutes per year (2.8 hours, SAIDI with major events) across 0.99 interruptions/yr — earning an EP Utility Reliability Grade of A. Observed average residential rate: 9.82¢/kWh.
Utility Reliability Field Brief • Dayton Power & Light Co (OH)

What Dayton Power & Light Co Outage Data Means for Customers

Dayton Power & Light Co is an investor-owned utility in the PJM balancing authority. It serves 528,722 customers across 24 tracked Ohio counties, including Auglaize, Brown, Butler, Champaign, Clark, and Clinton. Of those, 469,317 are residential, 57,924 are commercial, and 1,480 are industrial. The 2025 EIA Form 861 shows SAIDI of 167.6 minutes per year with major events and 96.5 without them, plus SAIFI of 0.99 outages per year. That earns an A grade, which means at or under 260 minutes. In plain terms, the average customer sees about one interruption a year. The gap between 167.6 and 96.5 is mostly storms. Averages hide the tail, though. If you sit at the end of a long feeder, your year can look nothing like the system number.

Sizing Quiet Home Backup vs. Standby Power in OH

Start by listing what you must keep running: refrigerator, a few lights, internet, furnace blower, sump pump, and any medical equipment. Add up the running watts, then check the startup surge on motors like the sump pump and well pump. That list decides everything.

A home battery system is quiet, has no exhaust, and suits short, frequent outages. It will not carry electric heat, a dryer, or a big air conditioner for long. At 9.82 cents/kWh, don't expect rate savings to pay for a battery. Buy it for the outages.

A standby generator on natural gas or propane suits long storm outages. It needs a properly installed transfer switch, a permit, and correct clearances. Check that the engine meets U.S. EPA emissions requirements. Never run a portable generator in a garage or near a window, and keep working carbon monoxide alarms in the house.

If you want both, a battery for the first hours with a generator behind it works well, but only if the two are designed together by a licensed electrician.

What Local Shops, Clinics & Facilities on Dayton Power & Light Co Lines Should Do

Decide what stops costing you money or hurting someone first. For a shop, that is usually refrigeration, point-of-sale, phones, and servers. For a clinic, it is vaccine and medication cooling, oxygen equipment, and records access. For a municipal operator, it is water pumping, sewer lift stations, traffic signals, and dispatch.

Put those loads on a dedicated emergency panel instead of trying to back up the whole building. Test the generator under real load on a schedule, not just a quick start. Log the runtime, change the oil and filters, and verify fuel supply and quality. Exercise the transfer switch too, because that is the part that fails when nobody has touched it in years.

Ask Dayton Power & Light Co about the reliability history of your specific feeder and whether your site qualifies for any critical-facility designation. Industrial customers should remember that SAIFI counts sustained outages. A momentary blink can still trip drives and controls, so consider ride-through protection on sensitive equipment.

An A grade means the grid is generally dependable. It does not mean your site is protected when the one bad day arrives, so plan for that day.

1. Official U.S. EIA Form 861 Reliability & Customer Record

EIA Form 861 MetricObserved Utility ValueReporting Basis
SAIDI (Total Outage Minutes / Year)167.6 min/yr (2.8 hrs)All Events w/ Major Event Days (2025)
SAIFI (Average Outages / Year)0.99 interruptions/yrIEEE / Utility Standard w/ MED
CAIDI (Avg Restoration Minutes / Outage)169.3 min/outageAverage Customer Outage Duration
SAIDI (Blue-Sky / Excluding Major Storms)96.5 min/yrWithout Major Event Days
Total Customers (Res / Com / Ind)528,722 (469,317 / 57,924 / 1,480)2025 EIA Form 861
Observed Residential Electricity Rate9.82¢/kWh2025 EIA Revenues / MWh
Ownership & Balancing AuthorityInvestor Owned • PJMU.S. EIA Form 861

2. Counties Served by Dayton Power & Light Co (24 Tracked in Ohio)

Select your county below to view local FEMA disaster history, CMS 24/7 emergency hospitals, NOAA Weather Radio frequencies, and county Continuity Grades:

3. Frequently Asked Questions (Dayton Power & Light Co)

How reliable is Dayton Power & Light Co compared to other US utilities?

Under 2025 U.S. EIA Form 861 reporting, Dayton Power & Light Co logged 167.6 total outage minutes/year (SAIDI with Major Event Days) and 96.5 minutes/year excluding major storms (Above-Average Reliability (<=260 min/yr)).

What counties does Dayton Power & Light Co serve in Ohio?

U.S. EIA Form 861 Service Territory records map Dayton Power & Light Co to Auglaize County, Brown County, Butler County, Champaign County, Clark County, Clinton County, Darke County, Delaware County and 16 additional counties in Ohio.

What backup battery or generator size is recommended for Dayton Power & Light Co customers?

For outages lasting 4 to 24+ hours, homeowners should start with 7–14 kWh of quiet indoor LFP battery backup for refrigeration, Wi-Fi, and medical devices—or an 18–22 kW standby generator with a UL 1008 transfer switch for full HVAC/well loads.

Free backup power & water sizer (60 sec) Size Backup Power