Duke Energy Ohio Inc (OH) Outage & Grid Reliability
Duke Energy Ohio Inc (U.S. EIA Utility #3542, Investor Owned) serves 766,538 total customers across 23 county/counties in Ohio (PJM grid). In official 2025 U.S. EIA Form 861 filings, customers experienced an average of 177.8 outage minutes per year (3.0 hours, SAIDI with major events) across 1.01 interruptions/yr — earning an EP Utility Reliability Grade of A. Observed average residential rate: 11.58¢/kWh.
What Duke Energy Ohio Inc Outage Data Means for Customers
Duke Energy Ohio is an investor-owned utility in the PJM balancing authority, serving 766,538 customers: 700,265 residential, 64,559 commercial, and 1,714 industrial. The 2025 EIA Form 861 shows SAIDI of 177.8 minutes per year with major events and 108.4 without them. SAIFI is 1.01, so the average customer loses power about once a year. That works out to roughly three hours of total downtime annually, which earns an A grade (above-average reliability, 260 minutes or less).
The gap between 177.8 and 108.4 is about 69 minutes, and that is storm time. Ordinary days are fine. The bad days are what hurt. Averages hide the customer at the end of a long tree-lined feeder in Adams or Brown County, who will wait longer than someone near a substation in Butler or Clark County. Clermont and Clinton sit somewhere between, depending on your circuit. Your own outage history matters more than the utility-wide number.
At 11.58 cents per kWh residential, power is not expensive, so backup is about protecting what an outage costs you, not about escaping the bill.
Sizing Quiet Home Backup vs. Standby Power in OH
Start with what you must keep running: refrigerator, furnace blower, sump pump, well pump if you have one, internet, lights, and medical equipment. Add up the running watts, then check the startup surge on motors. Surge is where people undersize.
For a grid with about one outage a year, a battery system with a critical-loads panel covers most events quietly. It switches over instantly, has no fumes, and needs no fuel run. It makes the most sense for short outages and for anyone with medical devices or a sump pump.
A permanently installed natural gas or propane standby generator suits a multi-day storm, when the battery runs dry. It needs a transfer switch, a permit, and proper clearance from windows and doors. Check the U.S. EPA emissions labeling and your local noise rules before buying.
A portable generator is the cheapest option and the most dangerous. Run it outdoors, well away from the house, and never feed it into a wall outlet. Without an interlock or transfer switch, you risk electrocuting a lineworker. Carbon monoxide kills people every storm season.
Whatever you choose, test it under load, rotate fuel, and exercise it monthly.
What Local Shops, Clinics & Facilities on Duke Energy Ohio Inc Lines Should Do
With 64,559 commercial and 1,714 industrial accounts on the system, a typical year brings a single interruption, which is manageable. The risk is the one that runs long. Decide what a four-hour loss costs you in spoiled stock, lost sales, or halted production, then size backup to that figure.
Shops and restaurants should protect the point-of-sale system, refrigeration, and lighting first. A small UPS on network gear and registers costs little and saves a lot of headaches. Clinics and care facilities should separate life-safety and critical circuits from convenience loads, install an automatic transfer switch, and load-test the generator on a schedule. Keep records, because inspectors ask.
Municipal operators should put generators or battery-backed controls on water, wastewater, signals, and dispatch, and keep fuel contracts current. Walk through a full restart sequence at least once a year. Ask Duke Energy Ohio which feeder serves each critical site, and whether it has an alternate source.
No grade replaces a plan. An A means outages are short and rare. It does not mean they are zero.
1. Official U.S. EIA Form 861 Reliability & Customer Record
| EIA Form 861 Metric | Observed Utility Value | Reporting Basis |
|---|---|---|
| SAIDI (Total Outage Minutes / Year) | 177.8 min/yr (3.0 hrs) | All Events w/ Major Event Days (2025) |
| SAIFI (Average Outages / Year) | 1.01 interruptions/yr | IEEE / Utility Standard w/ MED |
| CAIDI (Avg Restoration Minutes / Outage) | 175.1 min/outage | Average Customer Outage Duration |
| SAIDI (Blue-Sky / Excluding Major Storms) | 108.4 min/yr | Without Major Event Days |
| Total Customers (Res / Com / Ind) | 766,538 (700,265 / 64,559 / 1,714) | 2025 EIA Form 861 |
| Observed Residential Electricity Rate | 11.58¢/kWh | 2025 EIA Revenues / MWh |
| Ownership & Balancing Authority | Investor Owned • PJM | U.S. EIA Form 861 |
2. Counties Served by Duke Energy Ohio Inc (23 Tracked in Ohio)
Select your county below to view local FEMA disaster history, CMS 24/7 emergency hospitals, NOAA Weather Radio frequencies, and county Continuity Grades:
3. Frequently Asked Questions (Duke Energy Ohio Inc)
How reliable is Duke Energy Ohio Inc compared to other US utilities?
Under 2025 U.S. EIA Form 861 reporting, Duke Energy Ohio Inc logged 177.8 total outage minutes/year (SAIDI with Major Event Days) and 108.4 minutes/year excluding major storms (Above-Average Reliability (<=260 min/yr)).
What counties does Duke Energy Ohio Inc serve in Ohio?
U.S. EIA Form 861 Service Territory records map Duke Energy Ohio Inc to Adams County, Brown County, Butler County, Clark County, Clermont County, Clinton County, Coshocton County, Delaware County and 15 additional counties in Ohio.
What backup battery or generator size is recommended for Duke Energy Ohio Inc customers?
For outages lasting 4 to 24+ hours, homeowners should start with 7–14 kWh of quiet indoor LFP battery backup for refrigeration, Wi-Fi, and medical devices—or an 18–22 kW standby generator with a UL 1008 transfer switch for full HVAC/well loads.