Duke Energy Progress - (NC) (NC) Outage & Grid Reliability
Duke Energy Progress - (NC) (U.S. EIA Utility #3046, Investor Owned) serves 1,605,330 total customers across 56 county/counties in North Carolina (CPLE grid). In official 2025 U.S. EIA Form 861 filings, customers experienced an average of 183.2 outage minutes per year (3.1 hours, SAIDI with major events) across 1.41 interruptions/yr — earning an EP Utility Reliability Grade of A. Observed average residential rate: 15.19¢/kWh.
What Duke Energy Progress - (NC) Outage Data Means for Customers
Duke Energy Progress - (NC) is an investor-owned utility in the CPLE balancing authority. It serves 1,605,330 customers: 1,383,941 residential, 218,761 commercial, and 2,628 industrial. Residential customers pay an observed average of 15.19 cents/kWh. The 2025 EIA Form 861 shows SAIDI of 183.2 minutes a year with major events and 144.5 without them, plus SAIFI of 1.41 outages a year. That earns a grade of A, above-average reliability, well under the 260 minute line.
In plain terms, the average customer loses power about three hours a year, spread over a bit more than one outage. Divide the minutes by the interruptions and you get roughly two hours per outage. The gap between 183.2 and 144.5 minutes is what big storms add. These are system averages across 56 tracked counties, from Brunswick on the coast to Avery in the mountains, so your street can run better or worse. A good grade means outages are usually short. It does not mean yours will be.
Sizing Quiet Home Backup vs. Standby Power in NC
Start with what you cannot lose: refrigerator, furnace blower, well or sump pump, internet, some lights, and any medical equipment. Add up the running watts, then check the startup surge on anything with a motor. That list is your real load, not the whole panel.
Since a typical outage runs around two hours, a battery and inverter system sized for essentials covers most events quietly, with no fuel and no fumes. Size it for the critical loads circuit, not the electric range and the dryer.
Multi-day events like a hurricane or an ice storm are different. For those, a permanently installed standby generator on natural gas or propane, wired through a transfer switch by a licensed electrician with a permit, is the sound answer. Many homes do best with both: battery for the short outages, generator for the long ones. If you run a portable unit, keep it outdoors and well away from windows and doors, and keep working carbon monoxide alarms inside. Never backfeed through a dryer outlet.
What Local Shops, Clinics & Facilities on Duke Energy Progress - (NC) Lines Should Do
With 218,761 commercial customers on the system, most outages a business sees are short, and short ones still hurt. Put a UPS on point-of-sale, network gear, servers, and alarm panels so a blink does not become a reboot. Then decide what must keep running through a long outage: refrigeration, egress and emergency lighting, and a few circuits for operations.
Clinics should separate life-safety and medication-storage loads from convenience loads and confirm in writing how long backup can carry them. Test under real load, not just a no-load start.
Municipal operators should put lift stations, water treatment, traffic signals, and dispatch centers at the top of the list. Keep a fuel plan with a refill contract, exercise generators and transfer switches on a schedule, and log runtime. Any new fuel-burning equipment should be checked against U.S. EPA emissions rules and local air permit requirements before purchase.
For every facility, ask Duke Energy for your feeder's outage history. A feeder that has a bad record needs bigger backup than the system grade suggests.
1. Official U.S. EIA Form 861 Reliability & Customer Record
| EIA Form 861 Metric | Observed Utility Value | Reporting Basis |
|---|---|---|
| SAIDI (Total Outage Minutes / Year) | 183.2 min/yr (3.1 hrs) | All Events w/ Major Event Days (2025) |
| SAIFI (Average Outages / Year) | 1.41 interruptions/yr | IEEE / Utility Standard w/ MED |
| CAIDI (Avg Restoration Minutes / Outage) | 129.8 min/outage | Average Customer Outage Duration |
| SAIDI (Blue-Sky / Excluding Major Storms) | 144.5 min/yr | Without Major Event Days |
| Total Customers (Res / Com / Ind) | 1,605,330 (1,383,941 / 218,761 / 2,628) | 2025 EIA Form 861 |
| Observed Residential Electricity Rate | 15.19¢/kWh | 2025 EIA Revenues / MWh |
| Ownership & Balancing Authority | Investor Owned • CPLE | U.S. EIA Form 861 |
2. Counties Served by Duke Energy Progress - (NC) (56 Tracked in North Carolina)
Select your county below to view local FEMA disaster history, CMS 24/7 emergency hospitals, NOAA Weather Radio frequencies, and county Continuity Grades:
3. Frequently Asked Questions (Duke Energy Progress - (NC))
How reliable is Duke Energy Progress - (NC) compared to other US utilities?
Under 2025 U.S. EIA Form 861 reporting, Duke Energy Progress - (NC) logged 183.2 total outage minutes/year (SAIDI with Major Event Days) and 144.5 minutes/year excluding major storms (Above-Average Reliability (<=260 min/yr)).
What counties does Duke Energy Progress - (NC) serve in North Carolina?
U.S. EIA Form 861 Service Territory records map Duke Energy Progress - (NC) to Alamance County, Anson County, Avery County, Beaufort County, Bladen County, Brunswick County, Buncombe County, Carteret County and 48 additional counties in North Carolina.
What backup battery or generator size is recommended for Duke Energy Progress - (NC) customers?
For outages lasting 4 to 24+ hours, homeowners should start with 7–14 kWh of quiet indoor LFP battery backup for refrigeration, Wi-Fi, and medical devices—or an 18–22 kW standby generator with a UL 1008 transfer switch for full HVAC/well loads.