Inland Power & Light Company (WA) Outage & Grid Reliability
Inland Power & Light Company (U.S. EIA Utility #8699, Cooperative) serves 46,238 total customers across 10 county/counties in Washington (BPAT grid). In official 2025 U.S. EIA Form 861 filings, customers experienced an average of 536 outage minutes per year (8.9 hours, SAIDI with major events) across 2.55 interruptions/yr — earning an EP Utility Reliability Grade of BB. Observed average residential rate: 9.56¢/kWh.
What Inland Power & Light Company Outage Data Means for Customers
Inland Power & Light is a cooperative on the BPAT balancing authority, serving 46,238 customers: 42,351 residential, 3,387 commercial and 500 industrial. Counties on the tracked list include Adams, Asotin, Columbia, Franklin, Garfield and Lincoln. Residential power averages 9.56 cents per kWh, so the rate is not your problem. Long rural lines are.
The 2025 EIA Form 861 numbers say SAIDI with major events is 536.0 minutes a year, roughly nine hours. SAIFI is 2.55 outages per year. Take out major events and SAIDI falls to 283.0 minutes, under five hours. That gap tells the story. In an ordinary year you get a few short interruptions, and the storm, wind or fire event delivers the long one. The utility grade is BB, elevated multi-hour outage territory at 7 to 12 hours a year. These are system averages. If you sit at the end of a long radial tap, your year can run worse. A customer near a substation may see better. Ask the co-op which feeder you're on and what its recent history looks like.
Sizing Quiet Home Backup vs. Standby Power in WA
With outages averaging 2.55 a year, most of what you'll face is short. A battery system covers those silently, with no fuel, no noise and no fumes. Size it around essentials: refrigerator, freezer, internet, lights, furnace blower and, on rural property, the well pump. Add up what must run at the same time, using nameplate running watts. Then check starting surge on motors. Well pumps and compressors pull several times their running load for a moment, and that surge sinks undersized systems.
If your feeder has long multi-day storm repairs, a standby generator on propane or natural gas is the better backbone. A battery plus generator hybrid works well: the battery handles the first seconds and quiet hours, and the generator recharges it. Either way, have a licensed electrician install a proper transfer switch and do a load calculation. Never backfeed through a dryer outlet, because that energizes lines a lineman may be working on. Keep generators outdoors and well away from windows, since carbon monoxide kills people every storm season. Check current U.S. EPA emissions labeling on any unit you buy.
What Local Shops, Clinics & Facilities on Inland Power & Light Company Lines Should Do
Start by ranking your loads: what loses money or safety in the first hour, what can wait a day, and what can sit dark. Cold storage, point-of-sale, phones, data, medical refrigeration and well or lift station pumps usually top the list. Put them on a dedicated critical-loads panel behind an automatic transfer switch so backup does not depend on someone being on site.
Test under real load monthly, not just a five-minute idle run. Service it annually, keep fuel fresh and know your runtime at actual load. Small shops can often bridge short interruptions with a UPS or battery and keep the generator for long events.
Municipal operators should install generator connection points at wells, pump stations and dispatch buildings so a portable unit can be tied in safely. Industrial customers should talk with the co-op about voltage sags and momentary interruptions, which can trip equipment without any recorded outage.
Finally, keep your own outage log with start and end times, and report it. Your records give the co-op specifics when you ask about feeder work.
1. Official U.S. EIA Form 861 Reliability & Customer Record
| EIA Form 861 Metric | Observed Utility Value | Reporting Basis |
|---|---|---|
| SAIDI (Total Outage Minutes / Year) | 536 min/yr (8.9 hrs) | All Events w/ Major Event Days (2025) |
| SAIFI (Average Outages / Year) | 2.55 interruptions/yr | IEEE / Utility Standard w/ MED |
| CAIDI (Avg Restoration Minutes / Outage) | 210.3 min/outage | Average Customer Outage Duration |
| SAIDI (Blue-Sky / Excluding Major Storms) | 283 min/yr | Without Major Event Days |
| Total Customers (Res / Com / Ind) | 46,238 (42,351 / 3,387 / 500) | 2025 EIA Form 861 |
| Observed Residential Electricity Rate | 9.56¢/kWh | 2025 EIA Revenues / MWh |
| Ownership & Balancing Authority | Cooperative • BPAT | U.S. EIA Form 861 |
2. Counties Served by Inland Power & Light Company (10 Tracked in Washington)
Select your county below to view local FEMA disaster history, CMS 24/7 emergency hospitals, NOAA Weather Radio frequencies, and county Continuity Grades:
3. Frequently Asked Questions (Inland Power & Light Company)
How reliable is Inland Power & Light Company compared to other US utilities?
Under 2025 U.S. EIA Form 861 reporting, Inland Power & Light Company logged 536 total outage minutes/year (SAIDI with Major Event Days) and 283 minutes/year excluding major storms (Elevated Multi-Hour Outage Territory (7–12 hrs/yr)).
What counties does Inland Power & Light Company serve in Washington?
U.S. EIA Form 861 Service Territory records map Inland Power & Light Company to Adams County, Asotin County, Columbia County, Franklin County, Garfield County, Lincoln County, Spokane County, Stevens County and 2 additional counties in Washington.
What backup battery or generator size is recommended for Inland Power & Light Company customers?
For outages lasting multi-day stretches during storms, homeowners should start with 7–14 kWh of quiet indoor LFP battery backup for refrigeration, Wi-Fi, and medical devices—or an 18–22 kW standby generator with a UL 1008 transfer switch for full HVAC/well loads.