LIVE US PULSE: Loading NOAA NWS Alerts, DOE ODIN Outages, USGS Quakes & Wildfires...
Live Situation Room →
Emergency Preparedness
U.S. EIA Form 861 Utility Profile • Utility #4003 • Municipal • CISO

City of Colton - (CA) (CA) Outage & Grid Reliability

City of Colton - (CA) (U.S. EIA Utility #4003, Municipal) serves 19,723 total customers across 1 county/counties in California (CISO grid). In official 2025 U.S. EIA Form 861 filings, customers experienced an average of 66.3 outage minutes per year (1.1 hours, SAIDI with major events) across 0.42 interruptions/yr — earning an EP Utility Reliability Grade of AAA. Observed average residential rate: 23¢/kWh.

EIA Outage Time (SAIDI)66.3 min/yr (1.1 hrs)
Reliability GradeGrade AAA
Customers Served19,723 Total
Avg Residential Rate23¢/kWh
Utility Reliability Summary (City of Colton - (CA)): City of Colton - (CA) (U.S. EIA Utility #4003, Municipal) serves 19,723 total customers across 1 county/counties in California (CISO grid). In official 2025 U.S. EIA Form 861 filings, customers experienced an average of 66.3 outage minutes per year (1.1 hours, SAIDI with major events) across 0.42 interruptions/yr — earning an EP Utility Reliability Grade of AAA. Observed average residential rate: 23¢/kWh.
Utility Reliability Field Brief • City of Colton - (CA) (CA)

What City of Colton - (CA) Outage Data Means for Customers

City of Colton is a municipal utility in the CISO balancing authority, serving 19,723 customers in San Bernardino County: 17,367 residential, 2,065 commercial, and 291 industrial. The EIA Form 861 numbers are strong. SAIDI is 66.3 minutes a year, SAIFI is 0.42 outages a year, and the figure is identical with and without major event days. Divide the minutes by the interruptions and the average outage runs about 158 minutes, a little over two and a half hours. At 0.42, most customers go a couple of years between interruptions. The EP grade is AAA, top-decile, at or under 90 minutes a year.

Averages hide the unlucky, though. If you sit at the end of a feeder, or a vehicle takes out your pole, your year will not look like 66 minutes. Plan for your own circuit, not the average. At 23.0 cents per kWh residential, every kWh you store or make yourself has real value, and so does every gallon you don't burn.

Sizing Quiet Home Backup vs. Standby Power in CA

With outages this rare and this short, a battery system is usually the sensible home fit. Start by listing what must stay alive: refrigerator, internet, lights, phone charging, any medical equipment, maybe a fan or furnace blower. Add up the running watts, then find your biggest startup surge, usually an AC compressor or well pump. Size the inverter for that surge and the battery for the hours you want covered. Put those circuits on a critical-loads subpanel. Backing up the whole house is where costs balloon.

A battery that also cycles daily against a 23.0 cent rate earns its keep between outages. A standby generator makes sense if someone in the house depends on powered medical equipment, you have a well, or you want coverage well beyond a few hours. It needs a permitted transfer switch, proper clearances, and a monthly test run. If you own a portable unit, install a code-compliant interlock or inlet. Never backfeed through a dryer cord, and never run an engine in a garage.

What Local Shops, Clinics & Facilities on City of Colton - (CA) Lines Should Do

A two-and-a-half-hour outage will not close most doors, but it will spoil inventory, drop card sales, and crash servers. Start with the small fixes. Put a UPS on point-of-sale, network gear, and servers. Give controls and alarm panels their own ride-through power. Then decide what truly needs to keep running: refrigeration, life-safety lighting, critical process loads. Put those on an automatic-transfer generator or a battery system sized to them, not to the whole building.

Clinics should confirm which circuits sit on the emergency system and which ones don't, then test that separation under real load. Don't assume it works because it passed inspection years ago. For every generator, keep a maintenance log, fuel supply, and annual load-bank or full-load test.

Municipal operators should treat water pumping, lift stations, traffic signals, and communications as first priority. Know which feeders serve them, keep portable generator hookups ready, and rehearse the connection. Ask the utility for feeder-level outage history on your specific sites, because that history tells you more than any system average. Backup power should match your circuit and your loads, so size it to those.

1. Official U.S. EIA Form 861 Reliability & Customer Record

EIA Form 861 MetricObserved Utility ValueReporting Basis
SAIDI (Total Outage Minutes / Year)66.3 min/yr (1.1 hrs)All Events w/ Major Event Days (2025)
SAIFI (Average Outages / Year)0.42 interruptions/yrIEEE / Utility Standard w/ MED
CAIDI (Avg Restoration Minutes / Outage)157.8 min/outageAverage Customer Outage Duration
SAIDI (Blue-Sky / Excluding Major Storms)66.3 min/yrWithout Major Event Days
Total Customers (Res / Com / Ind)19,723 (17,367 / 2,065 / 291)2025 EIA Form 861
Observed Residential Electricity Rate23¢/kWh2025 EIA Revenues / MWh
Ownership & Balancing AuthorityMunicipal • CISOU.S. EIA Form 861

2. Counties Served by City of Colton - (CA) (1 Tracked in California)

Select your county below to view local FEMA disaster history, CMS 24/7 emergency hospitals, NOAA Weather Radio frequencies, and county Continuity Grades:

3. Frequently Asked Questions (City of Colton - (CA))

How reliable is City of Colton - (CA) compared to other US utilities?

Under 2025 U.S. EIA Form 861 reporting, City of Colton - (CA) logged 66.3 total outage minutes/year (SAIDI with Major Event Days) and 66.3 minutes/year excluding major storms (Top-Decile Grid Reliability (<=90 min/yr)).

What counties does City of Colton - (CA) serve in California?

U.S. EIA Form 861 Service Territory records map City of Colton - (CA) to San Bernardino County in California.

What backup battery or generator size is recommended for City of Colton - (CA) customers?

For outages lasting 4 to 24+ hours, homeowners should start with 7–14 kWh of quiet indoor LFP battery backup for refrigeration, Wi-Fi, and medical devices—or an 18–22 kW standby generator with a UL 1008 transfer switch for full HVAC/well loads.

Free backup power & water sizer (60 sec) Size Backup Power