City of San Antonio - (TX) (TX) Outage & Grid Reliability
City of San Antonio - (TX) (U.S. EIA Utility #16604, Municipal) serves 986,641 total customers across 8 county/counties in Texas (ERCO grid). In official 2025 U.S. EIA Form 861 filings, customers experienced an average of 110.6 outage minutes per year (1.8 hours, SAIDI with major events) across 1.54 interruptions/yr — earning an EP Utility Reliability Grade of AA. Observed average residential rate: 12.4¢/kWh.
What City of San Antonio - (TX) Outage Data Means for Customers
The 2025 EIA Form 861 numbers for this municipal utility are good. Across 986,641 customers, the average interruption time with major events included is 110.6 minutes a year, and 75.4 minutes without them. The average customer sees 1.54 outages a year. That earns an AA grade, which means 160 minutes a year or less. Divide the minutes by the outages and you get roughly 70 minutes per interruption on average.
An average hides the tails. Storms, heat waves, and ice events drive the gap between 75.4 and 110.6 minutes, and the customer at the end of a long rural feeder in Bandera, Kendall, or Atascosa County can have a very different year than someone near a downtown substation. Also, this utility sits in the ERCO balancing authority. When the statewide grid is stressed, a good local distribution record will not stop a system-wide emergency.
Residential customers pay an observed 12.4 cents per kWh, so backup fuel and equipment are the real cost of resilience, not the daily bill.
Sizing Quiet Home Backup vs. Standby Power in TX
Start with what you must keep running during a 70-minute outage and what you need during a multi-day event. Those are different problems.
For the short outage that most customers see, a battery system or even a portable power station covers the essentials: router, lights, phone chargers, a refrigerator, and maybe a fan. It is silent, needs no fuel, and can sit in a garage. Add up the running watts of your must-have loads, then check the surge rating for anything with a motor, like a fridge compressor or well pump.
For longer events, a natural gas or propane standby generator with an automatic transfer switch is the traditional answer. Size it from a real load list, not a guess. Central air in a Texas summer is the load that breaks undersized systems. Have a licensed electrician install it with permits, keep it outdoors and well away from windows, and never backfeed a panel through a dryer outlet. Carbon monoxide kills people every storm season. Check current U.S. EPA emissions labeling on any unit you buy, and run a test under load twice a year.
A hybrid setup works well: batteries carry you through the common short outages, and the generator handles the rare long one.
What Local Shops, Clinics & Facilities on City of San Antonio - (TX) Lines Should Do
Only 34 industrial customers are on this system, and 97,661 are commercial, so most businesses here are small and mid-sized. Plan like one. Decide what must stay up to keep you open: point-of-sale, refrigeration, phones, network gear, medication storage, security. Put those on a dedicated critical-loads panel.
Small shops should use an uninterruptible power supply on IT equipment and a transfer-switch inlet so a rental generator can connect fast. Clinics and any facility with refrigerated medication or powered medical equipment should have automatic standby power, a written fuel plan, and monthly load-tested runs. Log every test.
Municipal operators should map the feeders serving water, wastewater, traffic signals, and communications, and confirm each has backup with fuel for the longest realistic outage. Keep a vendor contact for emergency fuel before you need it.
Finally, ask the utility which feeder you are on and what its outage history looks like. That tells you more than the system average.
1. Official U.S. EIA Form 861 Reliability & Customer Record
| EIA Form 861 Metric | Observed Utility Value | Reporting Basis |
|---|---|---|
| SAIDI (Total Outage Minutes / Year) | 110.6 min/yr (1.8 hrs) | All Events w/ Major Event Days (2025) |
| SAIFI (Average Outages / Year) | 1.54 interruptions/yr | IEEE / Utility Standard w/ MED |
| CAIDI (Avg Restoration Minutes / Outage) | 71.8 min/outage | Average Customer Outage Duration |
| SAIDI (Blue-Sky / Excluding Major Storms) | 75.4 min/yr | Without Major Event Days |
| Total Customers (Res / Com / Ind) | 986,641 (888,946 / 97,661 / 34) | 2025 EIA Form 861 |
| Observed Residential Electricity Rate | 12.4¢/kWh | 2025 EIA Revenues / MWh |
| Ownership & Balancing Authority | Municipal • ERCO | U.S. EIA Form 861 |
2. Counties Served by City of San Antonio - (TX) (8 Tracked in Texas)
Select your county below to view local FEMA disaster history, CMS 24/7 emergency hospitals, NOAA Weather Radio frequencies, and county Continuity Grades:
3. Frequently Asked Questions (City of San Antonio - (TX))
How reliable is City of San Antonio - (TX) compared to other US utilities?
Under 2025 U.S. EIA Form 861 reporting, City of San Antonio - (TX) logged 110.6 total outage minutes/year (SAIDI with Major Event Days) and 75.4 minutes/year excluding major storms (High Grid Reliability (<=160 min/yr)).
What counties does City of San Antonio - (TX) serve in Texas?
U.S. EIA Form 861 Service Territory records map City of San Antonio - (TX) to Atascosa County, Bandera County, Bexar County, Comal County, Guadalupe County, Kendall County, Medina County, Wilson County in Texas.
What backup battery or generator size is recommended for City of San Antonio - (TX) customers?
For outages lasting 4 to 24+ hours, homeowners should start with 7–14 kWh of quiet indoor LFP battery backup for refrigeration, Wi-Fi, and medical devices—or an 18–22 kW standby generator with a UL 1008 transfer switch for full HVAC/well loads.