City of San Marcos - (TX) (TX) Outage & Grid Reliability
City of San Marcos - (TX) (U.S. EIA Utility #28978, Municipal) serves 26,154 total customers across 1 county/counties in Texas (ERCO grid). In official 2025 U.S. EIA Form 861 filings, customers experienced an average of 136.5 outage minutes per year (2.3 hours, SAIDI with major events) across 1.77 interruptions/yr — earning an EP Utility Reliability Grade of AA. Observed average residential rate: 12.73¢/kWh.
What City of San Marcos - (TX) Outage Data Means for Customers
San Marcos is a municipal utility in the ERCO balancing area, serving 26,154 customers in Hays County: 22,362 residential, 3,790 commercial, and 2 industrial. The 2025 EIA Form 861 shows SAIDI of 136.5 minutes per year with major events included, and SAIFI of 1.77 outages per year. The without-major-events figure is not reported, so I won't guess at it. That puts the grade at AA, high reliability, under the 160-minute line.
Divide it out and a typical outage runs about 77 minutes. That is an average. Your own feeder, a tree limb, or a failed transformer on your street can run much longer, and a storm can take out a whole neighborhood while the average still looks fine. Residential power averages 12.73 cents per kWh, so the case for backup is protecting what an outage disrupts, not saving money on the bill.
Sizing Quiet Home Backup vs. Standby Power in TX
Start with what you cannot do without: refrigerator, internet, lights, phone charging, a medical device if you have one, and in Texas, some cooling. Add up the running load, then check the starting surge on motors like the air conditioner compressor and well pump. Size to that list, not to the whole house.
With outages averaging around an hour and a quarter, a battery system with a modest inverter covers most events quietly, with no fuel to store and no fumes. It handles the essentials circuit well. Running central air through a long summer outage takes a much bigger battery, or a standby generator.
A natural gas or propane standby generator with an automatic transfer switch suits people with medical needs, a well, or a long-outage tolerance of zero. It must be installed by a licensed electrician with a permit, outdoors and well away from windows and air intakes. Never backfeed a panel through a dryer outlet, and never run a portable generator in a garage. Look for U.S. EPA emissions labeling and test the unit under load every month or so.
What Local Shops, Clinics & Facilities on City of San Marcos - (TX) Lines Should Do
With 3,790 commercial accounts, plenty of local businesses are in the same position. Start by listing what an outage actually costs you: spoiled inventory, lost sales, down point-of-sale and phone systems, lost records. A short outage hurts a restaurant with a walk-in cooler differently than it hurts an office.
Put a small online UPS on your servers, network gear, and registers so they ride through blips and shut down cleanly. SAIFI of 1.77 means momentary interruptions are part of life, and those are what corrupt data and trip sensitive equipment. Then decide whether you need a standby generator for refrigeration, lighting, and life-safety loads, wired through a transfer switch and tested under real load on a schedule.
Clinics and care facilities should separate truly critical circuits from convenience loads, document the plan, and keep fuel supply and maintenance logs current. Do not assume the grid grade replaces your own continuity plan.
Municipal operators should map critical facilities such as water pumping, lift stations, and communications, and confirm each has tested backup power and a fuel plan. Call the utility to ask about your feeder's history and about any planned work. Your own circuit matters more than a system average, and you should know it before the storm arrives.
1. Official U.S. EIA Form 861 Reliability & Customer Record
| EIA Form 861 Metric | Observed Utility Value | Reporting Basis |
|---|---|---|
| SAIDI (Total Outage Minutes / Year) | 136.5 min/yr (2.3 hrs) | All Events w/ Major Event Days (2025) |
| SAIFI (Average Outages / Year) | 1.77 interruptions/yr | IEEE / Utility Standard w/ MED |
| CAIDI (Avg Restoration Minutes / Outage) | 76.9 min/outage | Average Customer Outage Duration |
| SAIDI (Blue-Sky / Excluding Major Storms) | Not Reported | Without Major Event Days |
| Total Customers (Res / Com / Ind) | 26,154 (22,362 / 3,790 / 2) | 2025 EIA Form 861 |
| Observed Residential Electricity Rate | 12.73¢/kWh | 2025 EIA Revenues / MWh |
| Ownership & Balancing Authority | Municipal • ERCO | U.S. EIA Form 861 |
2. Counties Served by City of San Marcos - (TX) (1 Tracked in Texas)
Select your county below to view local FEMA disaster history, CMS 24/7 emergency hospitals, NOAA Weather Radio frequencies, and county Continuity Grades:
3. Frequently Asked Questions (City of San Marcos - (TX))
How reliable is City of San Marcos - (TX) compared to other US utilities?
Under 2025 U.S. EIA Form 861 reporting, City of San Marcos - (TX) logged 136.5 total outage minutes/year (SAIDI with Major Event Days) and — minutes/year excluding major storms (High Grid Reliability (<=160 min/yr)).
What counties does City of San Marcos - (TX) serve in Texas?
U.S. EIA Form 861 Service Territory records map City of San Marcos - (TX) to Hays County in Texas.
What backup battery or generator size is recommended for City of San Marcos - (TX) customers?
For outages lasting 4 to 24+ hours, homeowners should start with 7–14 kWh of quiet indoor LFP battery backup for refrigeration, Wi-Fi, and medical devices—or an 18–22 kW standby generator with a UL 1008 transfer switch for full HVAC/well loads.