LIVE US PULSE: Loading NOAA NWS Alerts, DOE ODIN Outages, USGS Quakes & Wildfires...
Live Situation Room →
Emergency Preparedness
U.S. EIA Form 861 Utility Profile • Utility #56692 • Community Choice Aggregator • CISO

Marin Clean Energy (CA) Outage & Grid Reliability

Marin Clean Energy (U.S. EIA Utility #56692, Community Choice Aggregator) serves 594,597 total customers across 1 county/counties in California (CISO grid). Official EIA Form 861 reliability SAIDI/SAIFI metrics are not separately filed for this utility tier. Observed average residential rate: 15¢/kWh.

EIA Outage Time (SAIDI)Not Reported (EIA)
Reliability GradeGrade NR
Customers Served594,597 Total
Avg Residential Rate15¢/kWh
Utility Reliability Summary (Marin Clean Energy): Marin Clean Energy (U.S. EIA Utility #56692, Community Choice Aggregator) serves 594,597 total customers across 1 county/counties in California (CISO grid). Official EIA Form 861 reliability SAIDI/SAIFI metrics are not separately filed for this utility tier. Observed average residential rate: 15¢/kWh.
Utility Reliability Field Brief • Marin Clean Energy (CA)

What Marin Clean Energy Outage Data Means for Customers

Marin Clean Energy is a Community Choice Aggregator operating in the CISO balancing authority. It buys and arranges the power. The poles, wires and transformers outside your window belong to the wires utility, which in most of this territory is PG&E. When the lights go out, that is who you call and who restores you.

The 2025/2024 EIA Form 861 data lists 594,597 customers: 533,896 residential, 60,701 commercial and zero industrial. The observed residential average is 15.0 cents per kWh. Reliability metrics were not reported because this is a short-form filing, so the grade is NR. That is not a good or bad mark. It means there is no published outage number to lean on, so don't read comfort into it.

Build your own record instead. Write down the date and length of every outage at your address, ask neighbors on the same feeder, and check the wires utility's outage maps and shutoff notices. Your own log tells you more than a statewide average will.

Sizing Quiet Home Backup vs. Standby Power in CA

Batteries are quiet, make no exhaust and switch over fast. They are limited by two numbers: kW, how much you can run at once, and kWh, how long you can run it. Standby generators on natural gas or propane run for days if fuel keeps coming, but they are loud and need permits, clearances and upkeep. Check that any unit meets U.S. EPA and California emissions rules.

Sizing starts with a list of what you must keep running: refrigerator, furnace blower, internet, lights, medical equipment, and a well pump if you have one. Read the nameplates for running watts and startup surge. Well pumps and air conditioner compressors hit hard when they start, and that surge is what trips undersized systems.

Have a licensed electrician install a transfer switch or interlock. Never backfeed a house through a dryer outlet, because that can kill a lineworker. Solar alone usually shuts off during an outage unless the inverter is built to island. Portable generators stay outdoors, well away from windows, with working CO alarms inside.

At 15.0 cents per kWh, the energy you will burn on backup is cheap. The equipment and installation are where the money goes, so spend it on the essentials first.

What Local Shops, Clinics & Facilities on Marin Clean Energy Lines Should Do

With 60,701 commercial accounts, a lot of businesses are in the same position: no published reliability data and no plan. Start with a panel walk. Mark the loads that cannot drop: refrigeration, point-of-sale, phones, network gear, egress lighting and alarms. Have an electrician put them on a dedicated backup panel so you aren't sizing a generator for the whole building.

Clinics should list medication refrigeration, oxygen concentrators, sterilizers and records systems, then decide what needs seamless power and what can tolerate a short gap. Add battery or UPS bridging where a gap is not acceptable, and put a generator behind it for long outages.

Municipal operators should rank pump stations, traffic signals, radio sites and shelters, and know which ones have fuel on site and which depend on a delivery. Keep a standing fuel contract and a written load-shed plan.

Whoever you are, test under real load on a schedule, not just a no-load exercise run. Log it, fix what fails, and call the wires utility early about planned shutoffs.

1. Official U.S. EIA Form 861 Reliability & Customer Record

EIA Form 861 MetricObserved Utility ValueReporting Basis
SAIDI (Total Outage Minutes / Year)Not ReportedAll Events w/ Major Event Days (EIA 861)
SAIFI (Average Outages / Year)Not ReportedIEEE / Utility Standard w/ MED
CAIDI (Avg Restoration Minutes / Outage)Not ReportedAverage Customer Outage Duration
SAIDI (Blue-Sky / Excluding Major Storms)Not ReportedWithout Major Event Days
Total Customers (Res / Com / Ind)594,597 (533,896 / 60,701 / 0)2025 EIA Form 861
Observed Residential Electricity Rate15¢/kWh2025 EIA Revenues / MWh
Ownership & Balancing AuthorityCommunity Choice Aggregator • CISOU.S. EIA Form 861

3. Frequently Asked Questions (Marin Clean Energy)

How reliable is Marin Clean Energy compared to other US utilities?

Marin Clean Energy files under EIA Form 861 short-form/exempt reliability reporting, so standardized IEEE SAIDI/SAIFI outage minutes are not published by EIA. Customers should evaluate backup sizing using their parent county FEMA hazard history below.

What counties does Marin Clean Energy serve in California?

Marin Clean Energy operates within California (Community Choice Aggregator). Check your exact county dossier via the California State Command Hub.

What backup battery or generator size is recommended for Marin Clean Energy customers?

For outages lasting 4 to 24+ hours, homeowners should start with 7–14 kWh of quiet indoor LFP battery backup for refrigeration, Wi-Fi, and medical devices—or an 18–22 kW standby generator with a UL 1008 transfer switch for full HVAC/well loads.

Free backup power & water sizer (60 sec) Size Backup Power