Pacific Gas & Electric Co. (CA) Outage & Grid Reliability
Pacific Gas & Electric Co. (U.S. EIA Utility #14328, Investor Owned) serves 5,728,333 total customers across 50 county/counties in California (CISO grid). In official 2025 U.S. EIA Form 861 filings, customers experienced an average of 272.6 outage minutes per year (4.5 hours, SAIDI with major events) across 1.63 interruptions/yr — earning an EP Utility Reliability Grade of BBB. Observed average residential rate: 29.68¢/kWh.
What Pacific Gas & Electric Co. Outage Data Means for Customers
Pacific Gas & Electric Co. is an investor-owned utility in the CISO balancing authority, serving 5,728,333 customers: 5,055,556 residential, 581,948 commercial, and 90,828 industrial. The EIA Form 861 numbers show 272.6 minutes per year of outage with major events included, and 1.63 interruptions per year. Strip out major events and it drops to 207.8 minutes. So major storms and similar events add about 65 minutes a year to the average.
That is roughly four and a half hours a year, in a bit over one and a half outages. Divide it out and the typical interruption runs near 167 minutes, a little under three hours. Averages hide the tail, though. Some customers get nothing all year and others sit dark through a long repair. Our grade is BBB, Moderate Outage Exposure, which covers 260 to 420 minutes a year. That is not alarming, but it is not something to ignore if you have refrigerated medicine, a sump pump, or a payroll to meet. Whether you are in Alameda, Alpine, Amador, Butte, Calaveras, Colusa, or any of the other 50 tracked counties, plan for the outage that lands on your circuit, not the average one.
Sizing Quiet Home Backup vs. Standby Power in CA
Start with a list of what must stay on: refrigerator, internet, lights, phone chargers, a medical device, maybe a well pump or sump pump. Add up the running watts, then note which items have motors that kick hard on startup. That list decides your equipment, not the brochure.
For a typical outage near three hours, a home battery system is quiet, starts instantly, and needs no fuel. It covers essentials well. It struggles when you try to run central air, an electric range, and a dryer together. Choose circuits carefully and have your electrician put the critical loads on a dedicated backup panel.
If you want multi-day coverage, such as after a major event, a permanently installed standby generator on a transfer switch is the traditional answer. Fuel supply, maintenance, and noise come with it. Engines also fall under U.S. EPA emissions rules, so buy a compliant unit and have it permitted and installed properly. Never backfeed a house through a dryer outlet. That is how line crews get hurt.
With rates at 29.68 cents per kWh residential average, a battery paired with solar can also trim daily bills. Count that as a side benefit, not the reason to buy it. Outage coverage is the reason.
What Local Shops, Clinics & Facilities on Pacific Gas & Electric Co. Lines Should Do
With 581,948 commercial and 90,828 industrial accounts on the system, a lot of you share the same exposure. Begin by pricing one hour of downtime: lost sales, spoiled stock, idle labor, missed appointments. If that cost beats the annualized cost of backup, you have your answer.
Clinics and small care sites should separate life-safety and patient-critical loads from convenience loads, and test the transfer equipment under real load, not just with a quick start. Food shops need refrigeration and point-of-sale on backup first. Light industrial sites should protect controls and servers with battery units so a flicker does not become a restart.
Municipal operators should treat water, wastewater, traffic signals, and dispatch as tiers. Write down fuel quantities, refill contacts, and who turns the key at 2 a.m. Exercise generators monthly, load-test them yearly, and keep a spare set of filters and belts on the shelf.
Backup power fails mostly from neglect, not design. Test it, log it, and fix what you find.
1. Official U.S. EIA Form 861 Reliability & Customer Record
| EIA Form 861 Metric | Observed Utility Value | Reporting Basis |
|---|---|---|
| SAIDI (Total Outage Minutes / Year) | 272.6 min/yr (4.5 hrs) | All Events w/ Major Event Days (2025) |
| SAIFI (Average Outages / Year) | 1.63 interruptions/yr | IEEE / Utility Standard w/ MED |
| CAIDI (Avg Restoration Minutes / Outage) | 167.2 min/outage | Average Customer Outage Duration |
| SAIDI (Blue-Sky / Excluding Major Storms) | 207.8 min/yr | Without Major Event Days |
| Total Customers (Res / Com / Ind) | 5,728,333 (5,055,556 / 581,948 / 90,828) | 2025 EIA Form 861 |
| Observed Residential Electricity Rate | 29.68¢/kWh | 2025 EIA Revenues / MWh |
| Ownership & Balancing Authority | Investor Owned • CISO | U.S. EIA Form 861 |
2. Counties Served by Pacific Gas & Electric Co. (50 Tracked in California)
Select your county below to view local FEMA disaster history, CMS 24/7 emergency hospitals, NOAA Weather Radio frequencies, and county Continuity Grades:
3. Frequently Asked Questions (Pacific Gas & Electric Co.)
How reliable is Pacific Gas & Electric Co. compared to other US utilities?
Under 2025 U.S. EIA Form 861 reporting, Pacific Gas & Electric Co. logged 272.6 total outage minutes/year (SAIDI with Major Event Days) and 207.8 minutes/year excluding major storms (Moderate Outage Exposure (260–420 min/yr)).
What counties does Pacific Gas & Electric Co. serve in California?
U.S. EIA Form 861 Service Territory records map Pacific Gas & Electric Co. to Alameda County, Alpine County, Amador County, Butte County, Calaveras County, Colusa County, Contra Costa County, El Dorado County and 42 additional counties in California.
What backup battery or generator size is recommended for Pacific Gas & Electric Co. customers?
For outages lasting 4 to 24+ hours, homeowners should start with 7–14 kWh of quiet indoor LFP battery backup for refrigeration, Wi-Fi, and medical devices—or an 18–22 kW standby generator with a UL 1008 transfer switch for full HVAC/well loads.