LIVE US PULSE: Loading NOAA NWS Alerts, DOE ODIN Outages, USGS Quakes & Wildfires...
Live Situation Room →
Emergency Preparedness
U.S. EIA Form 861 Utility Profile • Utility #1015 • Municipal • ERCO

Austin Energy (TX) Outage & Grid Reliability

Austin Energy (U.S. EIA Utility #1015, Municipal) serves 577,889 total customers across 2 county/counties in Texas (ERCO grid). In official 2025 U.S. EIA Form 861 filings, customers experienced an average of 182 outage minutes per year (3.0 hours, SAIDI with major events) across 1.29 interruptions/yr — earning an EP Utility Reliability Grade of A. Observed average residential rate: 13.14¢/kWh.

EIA Outage Time (SAIDI)182 min/yr (3.0 hrs)
Reliability GradeGrade A
Customers Served577,889 Total
Avg Residential Rate13.14¢/kWh
Utility Reliability Summary (Austin Energy): Austin Energy (U.S. EIA Utility #1015, Municipal) serves 577,889 total customers across 2 county/counties in Texas (ERCO grid). In official 2025 U.S. EIA Form 861 filings, customers experienced an average of 182 outage minutes per year (3.0 hours, SAIDI with major events) across 1.29 interruptions/yr — earning an EP Utility Reliability Grade of A. Observed average residential rate: 13.14¢/kWh.
Utility Reliability Field Brief • Austin Energy (TX)

What Austin Energy Outage Data Means for Customers

Austin Energy is a municipal utility in the ERCO balancing authority. It serves 577,889 customers in Travis and Williamson counties: 522,446 residential, 55,306 commercial, and 137 industrial. Residential customers pay an observed average of 13.14 cents/kWh.

The 2025 EIA Form 861 shows SAIDI of 182.0 minutes a year with major events and 76.8 minutes without them. SAIFI is 1.29 outages a year. That earns an EP grade of A, meaning above-average reliability at 260 minutes a year or less. In plain terms, the average customer loses power a little more than once a year, for a couple of hours. The roughly 105-minute gap between the two SAIDI figures is major events, mostly storms, and that is the part you plan for. Averages blend every feeder together. If you sit at the end of an older overhead line under heavy tree cover, your experience can run worse than the system number, and one bad event can swallow a whole year's average.

Sizing Quiet Home Backup vs. Standby Power in TX

Start with what must stay on, not the whole house. That usually means the refrigerator, internet router, lights, phone charging, a fan or furnace blower, and any medical equipment. Read the nameplates, add up the running watts, then account for startup surge on motors such as compressors and well pumps. The inverter has to handle the surge. The battery capacity, in kilowatt-hours, decides how many hours you get.

For the short outages the data suggests, a home battery is quiet, has no fumes, and switches over fast. For multi-day storm outages, a natural gas or propane standby generator with an automatic transfer switch is the more practical tool. It should be installed by a licensed electrician with permits, outdoors, and away from windows and air intakes. Portable generators never go in a garage or enclosed space, because carbon monoxide kills people every year. Buy equipment that meets U.S. EPA emissions rules.

Texas heat makes central air the load that breaks undersized systems. Don't plan to run it from a small battery. Cool one room with a window unit or mini-split instead. Whatever you buy, test it under real load every few months.

What Local Shops, Clinics & Facilities on Austin Energy Lines Should Do

Start by pricing an hour of downtime. Then list the loads that matter: point-of-sale, network gear, refrigeration, egress lighting, and any equipment that can be damaged by a hard shutdown. A UPS covers the short blips and gives servers time to shut down cleanly. A generator with an automatic transfer switch covers the longer outages. Sized by measured load rather than guesswork, it should carry refrigeration, lighting, and communications.

Clinics should treat vaccine and medication refrigeration, records access, and powered patient equipment as first-priority circuits. Keep a written outage plan, run the generator under load on a schedule, and keep a fuel or gas-supply arrangement you've confirmed will hold up in a regional emergency.

Municipal operators should build a critical-load list covering water pumping, lift stations, traffic signals, radios, and shelters. Put each on a transfer switch, load-test with a bank rather than idling, and log the results. Talk to your Austin Energy account representative about feeder priority and planned work, so you know what the utility can and can't promise during a major event.

1. Official U.S. EIA Form 861 Reliability & Customer Record

EIA Form 861 MetricObserved Utility ValueReporting Basis
SAIDI (Total Outage Minutes / Year)182 min/yr (3.0 hrs)All Events w/ Major Event Days (2025)
SAIFI (Average Outages / Year)1.29 interruptions/yrIEEE / Utility Standard w/ MED
CAIDI (Avg Restoration Minutes / Outage)141.1 min/outageAverage Customer Outage Duration
SAIDI (Blue-Sky / Excluding Major Storms)76.8 min/yrWithout Major Event Days
Total Customers (Res / Com / Ind)577,889 (522,446 / 55,306 / 137)2025 EIA Form 861
Observed Residential Electricity Rate13.14¢/kWh2025 EIA Revenues / MWh
Ownership & Balancing AuthorityMunicipal • ERCOU.S. EIA Form 861

2. Counties Served by Austin Energy (2 Tracked in Texas)

Select your county below to view local FEMA disaster history, CMS 24/7 emergency hospitals, NOAA Weather Radio frequencies, and county Continuity Grades:

3. Frequently Asked Questions (Austin Energy)

How reliable is Austin Energy compared to other US utilities?

Under 2025 U.S. EIA Form 861 reporting, Austin Energy logged 182 total outage minutes/year (SAIDI with Major Event Days) and 76.8 minutes/year excluding major storms (Above-Average Reliability (<=260 min/yr)).

What counties does Austin Energy serve in Texas?

U.S. EIA Form 861 Service Territory records map Austin Energy to Travis County, Williamson County in Texas.

What backup battery or generator size is recommended for Austin Energy customers?

For outages lasting 4 to 24+ hours, homeowners should start with 7–14 kWh of quiet indoor LFP battery backup for refrigeration, Wi-Fi, and medical devices—or an 18–22 kW standby generator with a UL 1008 transfer switch for full HVAC/well loads.

Free backup power & water sizer (60 sec) Size Backup Power